TCMMRC FPV Racing Drone kit


5 in stock

SKU: 14:100018786#6_17362b387f165c6c Categories: ,


TCMMRC Bully 220-The best fpv kit for drone introduction and practice by FPV professionals. The special design of brushless drone, FS-i6X remote control and SKY02X FPV goggles, bring you an unforgettable flying experience


Bully 220 drone

We specially designed the Bully 220 frame for a cross plane specially prepared for pilots who have just been flying.
It makes the carbon fiber board material look hard and lightweight. which perfectly solves many problems of pilots’ early flight. Pilots can enjoy about 5 minutes of flight time

FlySky FS-i6X remote control:

Channel: 6-10 (Default 6, you could choose 7-10ch in setting)
Model Type: Fixed-Wing/Glider/Helicopter
RF Range: 2.408-2.475GHz
RF Power: < 20dBm
RF Channel: 135
Bandwidth: 500KHz
2.4GHz System: AFHDS 2A / AFDHS
Modulation Type: GFSK
Stick Resolution 4096
Low Voltage Warning: < 4.2V
DSC port: PS/2 Port PPM
Antenna Length: 26mm (Dual Antenna)
Weight: 392g
Power: 6V DC 1.5AA*4
Display: STNTransflective Display, LCD 128×64 Lattice, VA 73x39mm, LCD with white backlight
Size: 174x89x190mm
On-line Update: Yes

TM89VQ remote control:

Frequency Range: 2.4G (2403MHz-2447MHz)
2.4G System: NRF24L01 and CC2500
Channel: 8
System: Bayang Protocol / Frsky Protocol
Power: ≤80mw
Model Type: Multi-rotor
Support USB Charging
Support FPV Simulator Connected
Output: PPM, support Student Radio Mode
LED Light: Green-Power On / Red-Warning / Blue-Normal
Battery: 1 * 350mAh 2S Battery(Removable)
Weight: 227.4g (with battery)
How to switch the protocol (D16/D8 Version)
Press and hold the bind button, then press the power button until the purple light is flashing. The flashing LED indicates different protocol the LiteRadio works on.
LED Status Protocol Version
Flash Once Frsky D16 FCC
Flash Twice Frsky D16 LBT
Flash Three Times Frsky D8


SKY02O FPV goggles


SteadyView Receiver,merge 2 signal into 1, make image more stable and clear in challenging condition

Intuitive interface, colorful UI with 2 languages

640*400 OLED screen, high contrast ratio

Support 4 preset screem settings and 3 customized settings for different condition of flight

Easy to access, with IO port on the bottom

Compatible with Fatshark diopter lens


Model : SKY02O

Screen: OLED

Resolution : 640*400

FOV: 29°

IPD: 59-69mm

Aspect Ratio : 16:10

Receiver : 5.8Ghz 48CH SteadyView Receiver Built-in


Head Tracker : 3-axis Accelerometer, 3-axis gyroscop

Voltage Input Range : 2-6S LiPo

Language : Chinese/English

Dimentions : 167*70*79mm

Weight : 210g

Package Included

1 x SKY02O FPV Goggles Set

1 x Patch antenna

1x Ommi antenna

VR009 FPV Goggles :

Functions: Video
FPV Goggles
Resolution: 480 x 320
TV System: NTSC / PAL Switchable
Screen size: 3 inch
Battery: 3.7V 1200mAh Li-ion polymer battery
Working Time: 2.5 hours
Charge time: 2 hours
Main Features:
● Portable, small size and light weight
● Low power consumption, working current: 300 – 330mA
● Double antenna reception to make the signal more stable
● One key auto-searching function, fast and accurate
● 3 inch 480 x 320 high brightness LCD screen
● Built-in super sensitiveness 5.8GHz 40CH receiver, especially with RaceBand
● Built-in 3.7V 1200mAh high-capacity Li-ion polymer battery for long time using
● Universal USB charging interface
● Very low time-delay real-time video return ( 10 – 20ms )
● Bilingual menu, support Chinese and English
● Support external Audio video signal input
● Support AV signal output ( connect external DVR )


Parameters of the drone:

220mm Racing Frame Kit
Wheelbase: 220mm
Arm thickness: 4mm
X plate thickness: 2mm
Floor thickness: 2mm
Upper plate thickness: 2mm
Side panel thickness: 2mm
Frame kit material: 3K carbon fiber & CNC 6065 aluminium

2306 2450KV 3-5S Brushless Motor
Motor kv: 2450rpm/v
No-load current (IO/10V): 1.48A
Support lithium battery section: 3-5S
Weight: 32.5 grams
Maximum continuous current: 41A
Maximum continuous power: 820W
Maximum thrust: 1368g (4s/6″)
Configuration: 12N/14P
Motor resistance (Rm): 0.0381Ω
Stator diameter: 23mm
Stator thickness: 6 mm
Motor diameter: 28.5 mm
Motor length: 19.7mm
Total length of shaft: 34.7mm
Axis thickness: M5
Mounting hole spacing: 16*19mm
Mounting screw: M3
Recommended propeller: 5 inches

Continuous current: 30A
Peak current: 35A (10s)
Input voltage: 2-4s
Firmware: blheli_s supports DSHOT 150-600 / MULTISHOT / PWM / ONESHOT125
MOS: 3*3
Ammeter: none
Weight: 28g
Mounting hole: 30.5×30.5mm / Φ4. 0
Size: 36*36mm

Omnibus F4 V3 flight controller
Project Name: Omnibus F4 V3 Flight Controller
Size: 36×36 mm
Mounting hole: 30.5×30.5mm
-STM32 F405 Microcontroller
– Support 2-4s power supply
-DSHOT support
– Configure drag and drop OSD via BetaFlight Configurator
– SmartAudio V2 support – adjust the PID and configure Omnibus FC from the transmitter
-MPU6000 6-axis SPI gyro and accelerometer
-SBU/PPM and Spketrum DSMX ports
-microSD card black box
– barometer (BMP280)

– Image filter (5V can only be supplied to VTX and camera)
The firmware is Betaflight_3.1.7_OmniBusf4sd
Brush BF/CF/INAV/PIX firmware
RUNCAM Swift 2 Camera
Image sensor: 1/3 SONY SUPER HAD II CCD
Horizontal resolution: 600TVL
Signal format: NTSC/PLA (switchable)
Integrated microphone: yes
Integrated OSD: Yes
Electronic shutter: PLA: 1/50-100000 NTSC: 1/60-100000
Signal to noise ratio: >60DB (AGC OFF)
Lens: 2.5mm (default)
Wide dynamic: digital wide dynamic
Digital noise reduction: 2D noise reduction
Day and night switching: color / automatic / black and white
Support voltage: 5v-36v
Size: 28.5*26*26mm
Weight: 14g
5.8G 40CH 25/200/600mw switchable VTX
Output power and transmission distance: ≥0.5km@25MW, ≥1km@200MW, ≥2km@600MW
Transmitting power: 0 mw/25 mw/200 mw/600 mw
Complete video format: NTSC/PAL
Input voltage and power consumption: 7V~24V, +12V/260MA@600MW
Size: 36 × 36 × 5mm
Weight: ≤7g (except antenna)
With output power self-test function.
Digital tube scanning: frequency (1-8), frequency band (A-E), power (1-3, 0 = 0 MW, 1 = 25 MW, 2 = 200 MW, 3 = 600 MW)

DALPROP T5046C three-bladed propeller
Specification: 5046*3
Brand Name: DALPROP
Product Name: 5046 Propeller
Material: imported PC
Quantity: 10 pairs
Color: blue
Weight: 4g / only
Center hole: 5mm
Spiral diameter: 127mm
Wheel thickness: 8mm

Dear customers, welcome to my store.

About Price

The shipping price in our store is set according to the exact weight of the package. Please take care the shipping fee in Chinese logistics company is calculated by each GRAM of the package weight. Therefore, the more products you order, the more shipping fee you have to pay because the total weight of the package increases. We do not earn any from shipping! However, if you buy a lot of different products in our store, you could ask our customer service to give some discount and change the total price for you.

About Shipping

Usually if we have the products you ordered in stock, we will arrange your shipping immediately on that day(9am-5pm Beijing Time, Monday – Saturday). If your order is not enough in stock, we will try our best to get it for you within the next two days. If we could not get that for you, we will contact with you right away to get refund or order other products instead.

For the shipping method, usually it takes about a fortnight to arrive to you. However, sometimes it takes only a few days while sometimes it takes more than 2 months, it is not stable. If you want to get your order safely and fast, please choose EPACKET or ALIEXPRESS STANDARD SHIPPING. EXPRESS(E-EMS etc.) shipping way is better though it is more expensive. REMEMBER most ECONOMIC shipping methods are NOT able to be tracked until the package arrives to you.

Our promising time for receiving items is 60days after we sent the package. This is because if the package was lost by logistics, we could only apply for compensation from them after 60days, otherwise shipping company would not deal with it. Therefore, if you could not receive the package within 60days, please remember to open dispute within 15days Buyers’ protection period to get refund from us. All logistics dispute within 60days we will refuse first.

About After-sale Service

If you have any questions when receiving your order(broken or not able to use), Please CONTACT WITH US FIRST!!! Quality issue of products always exist and we are very pleased to help you solve the problem! For most products that are defective, we will suggest customers to open dispute and get refund from Aliexpress platform. To be honest it is quite hard to do aftersale service on business across countries, most customers are not willing to ship the defective items back to sellers cause it takes additional money and time. Thus, keeping the defective items and get refund from the platform is the best way for both sellers and customers at the moment.

Finally, welcomed back to my store and please give us a good feedback if you are satisfied with our products and service. Thanks a lot.













Additional information