1. Do not charge the battery when you are away from home, do not charge the battery immediately after flying, do not over-discharge the battery (over-discharge may cause the battery to become useless because it cannot be charged.) Please cut off the power immediately after the battery is fully charged. Please do not charge for a long time.
2. Do not modify any parameters and wiring without knowing the flight control and remote control.
3. Turn on the remote control before powering on the aircraft, unplug the power switch after the flight, and then turn off the remote control to prevent accidents.
4. This product has been welded, if you have any technical and assembly problems, please feel free to contact us, we have a dedicated technical team to answer related questions.
5. This product is not a toy and is not suitable for children under 14 years of age.
6. If you are a beginner, it is recommended to be assisted by an experienced adult.
7. Novices should pay attention to not holding the airplane by hand when the airplane is turning, and don’t let children touch it to prevent it from being scratched.
8. When the airplane falls from a wall or hits other objects at a high altitude during flight, please turn off the start switch in time, otherwise it may cause damage to the flight control motor. After that, please check that the airplane is not damaged and the screws are not loose before you can take off again.
Functions and features:
Built-in OSD Betaflight
Support BLHeliSuit configuration
Support voltage 3-4S
7-10 minutes flight time
The remote control distance is about 400 meters (FLYSKY remote control), about 2000 meters (T-lite remote control)
Inner diameter of center hole: 5mm
Paddle diameter: 13.5mm
Center thickness: 7mm
Maximum blade width: 15.58mm
Working voltage: 2-6S
Maximum continuous working current: 45A
Maximum instantaneous working current: 50A
Support communication modes: DShot150/300/600, PWM, Oneshot125, Oneshot42 and Multshot
Firmware version: BL16.7
Installation hole distance: 20 * 20mm / 30.5 * 30.5mm
Product size: 44 * 44 * 5.5
Packing size in mm: 62 * 58 * 18 mm
Product net weight: 13.6 grams
Package weight: 27 grams
Input voltage range: 7-24V
Output power: 0mW / 25mW / 100mW / 200mW / 400mW / 600mW switchable
Transmission distance: ≥0.5km25mW, ≥1km200mW, ≥2km600mW
Installation size: 30.5*30.5mm
Stator diameter: 23 mm
Stator thickness: 6 mm
Number of stator arms: 12 pieces
Number of stator poles: 14
Motor KV: 2400
Maximum continuous power: 750 watts
Weight: 32 grams
Outer diameter: 28 mm
Support voltage: 3~4S
Mounting hole: 30.5×30.5mm
STM32 F405 MCU can shorten the cycle time.
Support SBUS / PPM / IBUS receiver mode
Sensor: CMOS 1/1.8
Video format: PAL/NTSC switchable
Input voltage: 5V-40V
White balance: automatic
FRSKY version, FLYSKY version, without receiving version.